JET Horizontal BANDSAW HVBS-7MW BAND SAW - $575 (Santa Paula)

7" x 12" Variable Speed Horizontal / Vertical Bandsaw Band saw $575.
JET BANDSAW HVBS-7MW BAND SAW STOCK NO-414459 This saw is 110VAC with a standard plug We bought this saw used in 2021 because it was 110VAC and we didn’t have three phase power at our new place.
But then we got a phase converter for our large cold saw and never ended up using this bandsaw.
The saw has been stored indoors and just needs a good cleaning with some engine degreaser.
Cutting guide bar and stop are included.
The vertical cutting table is also included.
This saw originally retailed for $1500, the new model is around $2000.
The coolant pump works; but is currently disconnected from the switch (so that it won’t be run dry) The plastic coolant tank is cracked and needs replacement; this part it is $52.
from ZORO Tools.
JET Fluid Reservoir HVBS7MW-66N https://www.
zoro.
com/jet-fluid-reservoir-hvbs7mw-66n/i/G0593419/?utm_source=google&utm_medium=surfaces&utm_campaign=shopping%20feed&utm_content=free%20google%20shopping%20clicks&campaignid=21152006616&productid=G0593419&v=&gad_source=1&gclid=Cj0KCQjwq86wBhDiARIsAJhuphmyY15zGsMX9ZZKMTb1eHyLLNCzSw46PIjCTtcIk5wIiLBzJX0mmRcaAn7qEALw_wcB&gclsrc=aw.
ds Also on eBay https://www.
ebay.
com/itm/225612920535?chn=ps&mkevt=1&mkcid=28&srsltid=AfmBOoq51OKRQYKMcOQkvyCqv-FSc66V3DptVnOtNGiMMVIXDlqAUUh9hUM The JET HVBS-7MW, 7 x 12 Metalworking Band Saw is powered by a 3/4 hp motor.
Each HVBS-7MW comes equipped with ball bearing blade guides, a 3/4 inch carbon steel blade, adjustable material stop and vertical worktable.
Circulating coolant system keeps the blade and material cool during the cutting process.
Hydraulic down feed control adjusts to provide the correct cutting pressure for the head and the saw automatically shuts off after each cut.
The 2 large diameter wheels and built in handle allow easy movement and the adjustable front legs ensure level and accurate cuts by featuring adjustable leveling pads.
.
75 hp motor, 7 inch capacity, 45 degree miter vise, Coolant system, Roller cabinet JET part number HVBS7MW-82 Bi-Metal Blade BLADE specs = 3/4” wide by 0.
032” thick x 93” long.
This machine is designed and intended for use with blades that are 3/4” wide by 0.
032” thick x 93” long.
Use of blades with difference specifications may cause inferior performance.
Turn blade tension knob (A, Figure 14) one and three quarter to two revolutions clockwise.
This equals approximately 23,000 lbs.
of blade tension.
Do not overtighten blade.
This may cause blade to stretch and warp