Posted : Sunday, May 05, 2024 03:41 PM
RHYS McGOVERN
show contact info
I have been working in the aerospace, defense, military, medical device, & commercial manufacturing for over 35 years.
With quality assurance, production, engineering and management.
From existing production lines to new products.
Processes that are to Six Sigma & Lean Manufacturing to achieve the best capable scenario for your customers & company with K =1.
33, 1.
67, 2.
00 for Cp, Cpk, Pp,Ppk, Cm, Cmk, with training, proper maintenance of machines & tools, no deviation from set process, addressing CTQ's at the beginning could yield 99.
99% or better, Process Capability, Process Performance, Machine Capability, Operators Capability to maximize the output eliminating waste of time & material, leads to on-time delivery and satisfied customers, more profits, more contracts, and growth.
EXPERIENCE: Quality Specialist III | The Boeing Company (Contract) 8/2022 - 2023 • Go to various suppliers for product verification, test procedures, electrical, proof loading, vibration, constant acceleration, coatings, chem film, anodize, Alodine, powder coat, primer, paint, • Verify all documents/procedures done to correct revisions everything stamped off correctly.
• Verify product shipped to correct address according to PO.
• NCR, CAPA, RCCA Consultant Quality Assurance/CAD Design Engineer | McREL & Associates | 11/2019 - 2023 • Consulting for Quality Assurance, Procurement of projects, designing product w/Solidworks, AutoCAD, TurboCAD.
2D and 3D modeling, Simulation, Force, Pressure, Torque, Thermal, Structural, Collision Detection, Mechanical, Electronics, Drawings, Layouts, Word, Excel (spreadsheets), Power Points, • QMS (Quality Management System).
Internal-external audits.
• AS (Aerospace Standards) 9100, 9101, 9102.
SAE (Society of Automotive Engineers) 9100C • ISO (International Standards Organization) 9000, 9001, 13485, 17025, 14791, 31000.
• NADCAP (National Aerospace and Defense Contractors Accredited Program) AC 7004.
• DSCC (Defense Supply Chain Columbus OH).
• FAA (Federal Aviation Administration) 14 CFR Part 21, 45 Subpart F & G Production 8110.
42.
8120.
22, 8120.
23 • Mil-PRF-STD (Military Performance Specifications/Standards), DOD (Department of Defense), NSA (National Security Agency).
• GMP (Good Manufacturing Practices) For the manufacturing facility, laboratories, production line • cGMP (Current Good Manufacturing Practices) employs the individuals follow 21 CFR 210 -211 & 820 • GLP (Good Laboratory Practice) Quality Manager | Ambrit Industries Inc.
2019 - 2019 (Ford, Toyota, Enhanced Vision, Blue White Industries) • Die Casting - aluminum alloys & zinc alloys for molds to produce products.
ISO 9001, 14791, 31000, GMP, cGMP, RCCA, CA, PA, SCAR, RMA, RTV, MRB, CTQ, PPAP, PPQA, SPC, SWOT, Gauge R&R, Lean Manufacturing, Traceability, Control Process Methods, Charts, travelers, Safety checklist, Safety coordinator, verifications, customer relations, aerospace, medical device, commercial products.
Manage and train inspectors as well as operators of casting, CNC machines, Forklift, Safety.
CAD Design Engineer | Impak Corporation 2019 - 2019 (VACUUM SEALER MACHINES) • Using SolidWorks 3-D (2016) Custom designing of Vacuum seal machines every piece and assembly to build custom Packaging machine pneumatics, nitrogen.
.
• cGMP Current Good Manufacturing Practice for pharmaceutical devices.
• Standard offerings or custom fabricated in our workshop to your exact specs.
of your machine, • Food Industries, Pharmaceutical Industry, Electronic Industry, Aerospace Industry, NASA, UL, set up revisions to be signed off by each representing division in company.
New explosion-proof sealers Quality Manger/CAD Design Engineer | GP Strategies 2018 -2018 (BO EING STARLINER CST-100 GCU) • QMS Quality management System) (setup non-existing quality management system ISO 9001 Implemented) cGMP.
GLP, FAA, 14 CFR 21, 14 CFR Part 400-460, NASA/JSC Specifications Procedures.
Boeing auditors.
• ADP (Acceptance Data Package • CAPA, SCAR, RCCA,MRB, MRB Cage (built), RMA, RTV, Traceability Quality Assurance | Alliance Metal Products 2017-2017 (Aerovironment Inc.
, Circor Aerospace Inc.
) • Surface Plate Inspections, CMM Mitutoyo COSMOS Software, Vision System, QC 5000.
Calipers, Micrometers, Optical Comparators (& Molds), Bore Gages, Universal Concentric Gauges, Drop Indicators, Go -No-Go Gages, NCR, CAPA, RCCA Supplier Quality Engineer | Skylock Industries 2015-2016(BOEING 737) • AS 9100, AS 9101, ISO 9000, 9001, , GMP, cGMP , NADCAP, NIST, ITAR, NPI, FAA, 14 CFR Part 21, 14 CFR Part 400-460, ANSI Y 14.
5 Supplier Quality, Control Process Methods, Traceability AS 9100, AS 9101, ISO 9000, 9001 ANSI Y 14.
5 NADCAP, NIST, ITAR, NPI, FAA 14 CFR 400-406, BAC 5946, 5619 AMS 5727, 5525, 5732, 5844, 5845, 5643, 5659, 5520, 2759 ASTM 693, CAD Design Engineer | Ronan Engineering Company | 2014 - 2015 • AutoCAD & SolidWorks to design parts, Wiring, and Assemblies of Alarm Annunciators, Leak monitors, Recorders, Nuclear Power Plants, Waste Management, Power Plants, Petroleum Wells, Word, Excel, Power Points.
• ISO 9000, 9001, NQA, ANSI Y 14.
5 Certifications NRC, NEMA, SAMA, ANSI, IEEE, ISA, CE, ATEX, IEC, UL, FM, CSA.
AUTOCAD & SolidWorks to design parts, Wiring, and Assemblies of Alarm Annunciators, Leak monitors, Recorders, Nuclear Power Plants, Waste Management, Power Plants, Petroleum Wells, Word, Excel, Power Points.
Quality Assurance | Adel Wiggins | 2014 - 2014 (Boeing 787, Airbus, Mitsubishi) • Inspection of Aviation Aerospace fuel isolators, composites, assemblies.
GDT, ANSI Y 14.
5.
• ITARS, NADCAP, AS9100, 9101, 9102, ISO 9001, GMP, cGMP, 14 CFR Part 21, ANSI Y 14.
5.
NCR, CAPA, RCCA, MRB, RMA, RTV.
Log Sheets.
• Surface Plate Inspections, CMM Mitutoyo (COSMOS & manual), Vision System, and QC 5000.
Calipers, Micrometers, Optical Comparators (& Molds), Bore Gages, Universal Concentric Gages, Drop Indicators, Go -No-Go Gages, Lean Manufacturing Quality Supplier Engineer/Tech III | Teledyne Microelectronic Technologies | 2005 - 2009 (DO D/NSA, Boeing, Lockheed Martin, Mars RO VER Spirit & O pportunity NASA/JPL, Space Shuttle STS -118 boosters, St.
Jude medical (heart defibrillator, pacemakers) Medtronics (pacemakers dual chambers & Micra, hearing aids) • RECIEVING INSPECTION ANSI Y 14.
5 • MILITARY, AEROSPACE, DEPARTMENT OF DEFENSE, FAA, MEDICAL, COMERCIAL PRODUCT • (CMM) COORDINATE MEASURING MACHINE - (OGP) Optical Gage Prod.
Smartscope FLASH 200.
Programmed and Ran (over 8,000 hrs.
) for (DOD/NSA) Product, Aerospace, Defense, Military, Medical Device • ISO 9000, 9001, 13485, 17025, 14791, 31000 AS 9100, 9101, 9102, DSCC, FAA, GMP, cGMP, GLP, 14 CFR Part 21, 14 CFR Part 400-460, 21 CFR Subpart 210 - 211 & 820, MIL-STD 883, MIL-STD 810, MIL-PRF-38534, 38535.
Internal & External audits .
Computer Consultant | G.
L.
Consulting | 03/2003 - 05/2005 • Format, installed programs, maintained computers, additions, networks for multiple businesses, Desktops, Laptops, Wireless, Routers, Switches, IP Addresses, Virus, Spyware Protection.
Test Technician | Teledyne Microelectronic Technologies | 2000 - 2003 • ISO 9000, 9001, 13485, 17025, 14791, 3100 AS 9100, 9101, 9102, DSCC, FAA, GMP, cGMP, GLP, 14 CFR Part 21, 14 CFR Part 400-460.
21 CFR Subpart 210 - 211 & 820, MIL-STD 883, MIL STD-810 G, MIL-PRF-38534, MIL-PRF 38535, Aerospace & Commercial Products Testing Relays, Oscilloscopes, Power Meters, Decade Boxes, Centrifuge, Sonoscan, Ionograph, Cycling etc.
Series of electrical test performed on AC & DC solid-state relays.
Optically Isolated, Silicon Carbide, Optically Isolated, Short-Circuit Protected, True-Output Status-Feedback, Flat Trip Short-Circuit Protection, Normally Closed Dual-Output, 3-Phase, Output Bidirectional.
AC & DC solid state relays.
Education: CALIFORNIA STATE UNIVERSITY LOS ANGELES (Towards), Bachelor's Degree in Mechanical Drafting Graphic Design Engineering | 2015 PIERCE COLLEGE, Associate Degree in CNC (Computer Numerical Control) Programming/Operator/Machine Shop| 2014 PIERCE COLLEGE, Associate Degree in Mechanical Drafting | 2012 PIERCE COLLEGE, Associate Degree in Electrical, Electronics and Communications Engineering | 2011 MOORPARK COLLEGE, Associate Degree in Laser Electro-Optics | 1993 * Published in 2013 Los Angeles Pierce College workbook for advanced machine shop students for 16 pages of Arbor Press Project for parts and assembly, and 1 page for 1, 2, 3, Block Project, done in Solidworks and 16 pages of GD & T to verify all parts geometric dimensions and tolerances, for Ron Smetzer head of the Industrial CNC and Machine Shop for Los Angeles Pierce College
With quality assurance, production, engineering and management.
From existing production lines to new products.
Processes that are to Six Sigma & Lean Manufacturing to achieve the best capable scenario for your customers & company with K =1.
33, 1.
67, 2.
00 for Cp, Cpk, Pp,Ppk, Cm, Cmk, with training, proper maintenance of machines & tools, no deviation from set process, addressing CTQ's at the beginning could yield 99.
99% or better, Process Capability, Process Performance, Machine Capability, Operators Capability to maximize the output eliminating waste of time & material, leads to on-time delivery and satisfied customers, more profits, more contracts, and growth.
EXPERIENCE: Quality Specialist III | The Boeing Company (Contract) 8/2022 - 2023 • Go to various suppliers for product verification, test procedures, electrical, proof loading, vibration, constant acceleration, coatings, chem film, anodize, Alodine, powder coat, primer, paint, • Verify all documents/procedures done to correct revisions everything stamped off correctly.
• Verify product shipped to correct address according to PO.
• NCR, CAPA, RCCA Consultant Quality Assurance/CAD Design Engineer | McREL & Associates | 11/2019 - 2023 • Consulting for Quality Assurance, Procurement of projects, designing product w/Solidworks, AutoCAD, TurboCAD.
2D and 3D modeling, Simulation, Force, Pressure, Torque, Thermal, Structural, Collision Detection, Mechanical, Electronics, Drawings, Layouts, Word, Excel (spreadsheets), Power Points, • QMS (Quality Management System).
Internal-external audits.
• AS (Aerospace Standards) 9100, 9101, 9102.
SAE (Society of Automotive Engineers) 9100C • ISO (International Standards Organization) 9000, 9001, 13485, 17025, 14791, 31000.
• NADCAP (National Aerospace and Defense Contractors Accredited Program) AC 7004.
• DSCC (Defense Supply Chain Columbus OH).
• FAA (Federal Aviation Administration) 14 CFR Part 21, 45 Subpart F & G Production 8110.
42.
8120.
22, 8120.
23 • Mil-PRF-STD (Military Performance Specifications/Standards), DOD (Department of Defense), NSA (National Security Agency).
• GMP (Good Manufacturing Practices) For the manufacturing facility, laboratories, production line • cGMP (Current Good Manufacturing Practices) employs the individuals follow 21 CFR 210 -211 & 820 • GLP (Good Laboratory Practice) Quality Manager | Ambrit Industries Inc.
2019 - 2019 (Ford, Toyota, Enhanced Vision, Blue White Industries) • Die Casting - aluminum alloys & zinc alloys for molds to produce products.
ISO 9001, 14791, 31000, GMP, cGMP, RCCA, CA, PA, SCAR, RMA, RTV, MRB, CTQ, PPAP, PPQA, SPC, SWOT, Gauge R&R, Lean Manufacturing, Traceability, Control Process Methods, Charts, travelers, Safety checklist, Safety coordinator, verifications, customer relations, aerospace, medical device, commercial products.
Manage and train inspectors as well as operators of casting, CNC machines, Forklift, Safety.
CAD Design Engineer | Impak Corporation 2019 - 2019 (VACUUM SEALER MACHINES) • Using SolidWorks 3-D (2016) Custom designing of Vacuum seal machines every piece and assembly to build custom Packaging machine pneumatics, nitrogen.
.
• cGMP Current Good Manufacturing Practice for pharmaceutical devices.
• Standard offerings or custom fabricated in our workshop to your exact specs.
of your machine, • Food Industries, Pharmaceutical Industry, Electronic Industry, Aerospace Industry, NASA, UL, set up revisions to be signed off by each representing division in company.
New explosion-proof sealers Quality Manger/CAD Design Engineer | GP Strategies 2018 -2018 (BO EING STARLINER CST-100 GCU) • QMS Quality management System) (setup non-existing quality management system ISO 9001 Implemented) cGMP.
GLP, FAA, 14 CFR 21, 14 CFR Part 400-460, NASA/JSC Specifications Procedures.
Boeing auditors.
• ADP (Acceptance Data Package • CAPA, SCAR, RCCA,MRB, MRB Cage (built), RMA, RTV, Traceability Quality Assurance | Alliance Metal Products 2017-2017 (Aerovironment Inc.
, Circor Aerospace Inc.
) • Surface Plate Inspections, CMM Mitutoyo COSMOS Software, Vision System, QC 5000.
Calipers, Micrometers, Optical Comparators (& Molds), Bore Gages, Universal Concentric Gauges, Drop Indicators, Go -No-Go Gages, NCR, CAPA, RCCA Supplier Quality Engineer | Skylock Industries 2015-2016(BOEING 737) • AS 9100, AS 9101, ISO 9000, 9001, , GMP, cGMP , NADCAP, NIST, ITAR, NPI, FAA, 14 CFR Part 21, 14 CFR Part 400-460, ANSI Y 14.
5 Supplier Quality, Control Process Methods, Traceability AS 9100, AS 9101, ISO 9000, 9001 ANSI Y 14.
5 NADCAP, NIST, ITAR, NPI, FAA 14 CFR 400-406, BAC 5946, 5619 AMS 5727, 5525, 5732, 5844, 5845, 5643, 5659, 5520, 2759 ASTM 693, CAD Design Engineer | Ronan Engineering Company | 2014 - 2015 • AutoCAD & SolidWorks to design parts, Wiring, and Assemblies of Alarm Annunciators, Leak monitors, Recorders, Nuclear Power Plants, Waste Management, Power Plants, Petroleum Wells, Word, Excel, Power Points.
• ISO 9000, 9001, NQA, ANSI Y 14.
5 Certifications NRC, NEMA, SAMA, ANSI, IEEE, ISA, CE, ATEX, IEC, UL, FM, CSA.
AUTOCAD & SolidWorks to design parts, Wiring, and Assemblies of Alarm Annunciators, Leak monitors, Recorders, Nuclear Power Plants, Waste Management, Power Plants, Petroleum Wells, Word, Excel, Power Points.
Quality Assurance | Adel Wiggins | 2014 - 2014 (Boeing 787, Airbus, Mitsubishi) • Inspection of Aviation Aerospace fuel isolators, composites, assemblies.
GDT, ANSI Y 14.
5.
• ITARS, NADCAP, AS9100, 9101, 9102, ISO 9001, GMP, cGMP, 14 CFR Part 21, ANSI Y 14.
5.
NCR, CAPA, RCCA, MRB, RMA, RTV.
Log Sheets.
• Surface Plate Inspections, CMM Mitutoyo (COSMOS & manual), Vision System, and QC 5000.
Calipers, Micrometers, Optical Comparators (& Molds), Bore Gages, Universal Concentric Gages, Drop Indicators, Go -No-Go Gages, Lean Manufacturing Quality Supplier Engineer/Tech III | Teledyne Microelectronic Technologies | 2005 - 2009 (DO D/NSA, Boeing, Lockheed Martin, Mars RO VER Spirit & O pportunity NASA/JPL, Space Shuttle STS -118 boosters, St.
Jude medical (heart defibrillator, pacemakers) Medtronics (pacemakers dual chambers & Micra, hearing aids) • RECIEVING INSPECTION ANSI Y 14.
5 • MILITARY, AEROSPACE, DEPARTMENT OF DEFENSE, FAA, MEDICAL, COMERCIAL PRODUCT • (CMM) COORDINATE MEASURING MACHINE - (OGP) Optical Gage Prod.
Smartscope FLASH 200.
Programmed and Ran (over 8,000 hrs.
) for (DOD/NSA) Product, Aerospace, Defense, Military, Medical Device • ISO 9000, 9001, 13485, 17025, 14791, 31000 AS 9100, 9101, 9102, DSCC, FAA, GMP, cGMP, GLP, 14 CFR Part 21, 14 CFR Part 400-460, 21 CFR Subpart 210 - 211 & 820, MIL-STD 883, MIL-STD 810, MIL-PRF-38534, 38535.
Internal & External audits .
Computer Consultant | G.
L.
Consulting | 03/2003 - 05/2005 • Format, installed programs, maintained computers, additions, networks for multiple businesses, Desktops, Laptops, Wireless, Routers, Switches, IP Addresses, Virus, Spyware Protection.
Test Technician | Teledyne Microelectronic Technologies | 2000 - 2003 • ISO 9000, 9001, 13485, 17025, 14791, 3100 AS 9100, 9101, 9102, DSCC, FAA, GMP, cGMP, GLP, 14 CFR Part 21, 14 CFR Part 400-460.
21 CFR Subpart 210 - 211 & 820, MIL-STD 883, MIL STD-810 G, MIL-PRF-38534, MIL-PRF 38535, Aerospace & Commercial Products Testing Relays, Oscilloscopes, Power Meters, Decade Boxes, Centrifuge, Sonoscan, Ionograph, Cycling etc.
Series of electrical test performed on AC & DC solid-state relays.
Optically Isolated, Silicon Carbide, Optically Isolated, Short-Circuit Protected, True-Output Status-Feedback, Flat Trip Short-Circuit Protection, Normally Closed Dual-Output, 3-Phase, Output Bidirectional.
AC & DC solid state relays.
Education: CALIFORNIA STATE UNIVERSITY LOS ANGELES (Towards), Bachelor's Degree in Mechanical Drafting Graphic Design Engineering | 2015 PIERCE COLLEGE, Associate Degree in CNC (Computer Numerical Control) Programming/Operator/Machine Shop| 2014 PIERCE COLLEGE, Associate Degree in Mechanical Drafting | 2012 PIERCE COLLEGE, Associate Degree in Electrical, Electronics and Communications Engineering | 2011 MOORPARK COLLEGE, Associate Degree in Laser Electro-Optics | 1993 * Published in 2013 Los Angeles Pierce College workbook for advanced machine shop students for 16 pages of Arbor Press Project for parts and assembly, and 1 page for 1, 2, 3, Block Project, done in Solidworks and 16 pages of GD & T to verify all parts geometric dimensions and tolerances, for Ron Smetzer head of the Industrial CNC and Machine Shop for Los Angeles Pierce College
• Phone : NA
• Location :
• Post ID: 9008855360